fbpx URBAN™ Coping, Pavers Ontario | Unilock
EN

URBAN™

Urban large format slabs can be paired with a matching coping for a sleek, contemporary and harmonious look. Urban slabs and coping are made with EnduraColor™, making for a surface that is colorfast and highly durable. Perfect for patios, walkways and pool surrounds. 

-
-

URBAN™

Urban large format slabs can be paired with a matching coping for a sleek, contemporary and harmonious look. Urban slabs and coping are made with EnduraColor™, making for a surface that is colorfast and highly durable. Perfect for patios, walkways and pool surrounds. 

Colors
Applications
Coping
Pedestrian e1632317129849
Residential & Commercial Pedestrian
Shape and size
img
18"X24"
450mm x 600mm x 60mm
17 3/4" x 23 5/8" x 2 3/8"
img
18"X24"
450mm x 600mm x 60mm
17 3/4" x 23 5/8" x 2 3/8"
img
18"X36"
450mm x 900mm x 60mm
17 3/4" x 35 1/2" x 2 3/8"
img
18"X36"
450mm x 900mm x 60mm
17 3/4" x 35 1/2" x 2 3/8"
img
COPING BULLNOSE
900mm x 60mm x 485mm
35 1/2" x 2 3/8" x 19"
img
COPING BULLNOSE
900mm x 60mm x 485mm
35 1/2" x 2 3/8" x 19"
img
COPING CHAMFERED
900mm x 60mm x 485mm
35 1/2" x 2 3/8" x 19"
img
COPING CHAMFERED
900mm x 60mm x 485mm
35 1/2" x 2 3/8" x 19"
Technologies
Technologies
EnduraColor
img
img

The refined surface of Unilock EnduraColor products is achieved with a two step manufacturing process that combines a base of coarser aggregates for a stronger foundation, with concentrated color and wear-resistant finer aggregates on top. This process protects the surface from the appearance of fading over time because the top layer prevents large, lighter color aggregates from ever showing through.

Our technologies
Colors
INDIANA BUFF
STERLING
Pick a color
INDIANA BUFF
STERLING
img
Information
Information
Packaging

URBAN™

Urban Line pavers are wide-format pavers manufactured at only 2 3/8” (60mm) thick. This allows for easier installation of non-vehicular applications in urban areas where access or space is limited. Urban Line pavers are made with EnduraColor™, for optimal color vibrancy and longevity.

Recommended Base Stabilization – one layer of DriveGrid™ stabilization grid between subgrade and base material. Recommended depth 8” to 10” below pavers for maximum stability and performance. Use under Standard Base or Permeable Base.

Standard Base – Min. 6” – 8” of ¾” Crushed gravel (any road base standard in accordance with ASTM-D2940) compacted to 98% Standard Proctor Density (SPD).

Standard Bedding Course – 1” thick of coarse sand– in accordance with ASTM-D2940 screeded over base.

Alternative Permeable Base – Min. 6” – 8” of ¾“ clear open-graded stone compacted to achieve full particle lock-up and consolidation. (Note: Clear open-graded does not compact but does consolidate slightly by vibrating the particles together.)

Alternative Permeable Bedding Course – 1” thick of frac14;” clear open-graded chip stone – (ASTM No. 8) screeded over base.

Special Note: Concrete Direct Overlay – In some areas of the country and in some applications, pavers are very successfully placed directly over concrete. Concrete as a base is in itself quite strong, but it can affect the structural integrity of the paver particularly in vehicular applications, where the concrete below is sub-par. The following considerations must be taken into account to insure that the concrete below the surface is ideal:

  1. Concrete integrity – concrete must be in good condition, and not crumbling
  2. Drainage slope – concrete below must be sloped away from all buildings and structures
  3. Drainage holes – In lowest areas of the concrete, drill 1” holes in concrete (on 12” centers) and fill holes with ¼” chip (ASTM No. 8)
  4. Base drainage - the area below the concrete must not be subject to frost movement
  5. Surface - surface must be totally smooth and flat equivalent to the desired finished surface
  6. Waterproofing - may be required when installing pavers over concrete where there is a basement or cold cellar below. Install an impervious rubber membrane over the surface prior to installing any pavers over the surface.
  7. Jointing Sand - Use an impervious polymeric sand when installing over concrete

Jointing Material and Joint Stabilization 

All sands must meet ASTM C144 or C33 Specifications. For best appearance and optimal performance, keep jointing materials approximately 1/8” below the chamfer (bevel edge) of the paver.

Good Option: Ordinary sharp jointing sand in accordance with ASTM C144 or C33. (Common name: Concrete Sand) Important Information (Will update to the same Product Family)

Best Option 1: Any polymeric sand or resin-based joint sand . Always follow manufacturer’s specifications and requirements.

Best Option 2:  Ordinary clean concrete sand stabilized with a water-based or solvent-based joint sand stabilizer sealer. Always follow sealer manufacturer’s application specifications and requirements.

Handling – This product is large format and should be installed using a suction lifting device. Do not let units bang against each other when handling as chipping may occur.

Edge Restraint - Install an edge restraint around the perimeter of any pavers not restrained by existing concrete edges and/or building structures. Spike-in edge restraints come in plastic and metal and work well for most applications. A concrete curb or a sub-surface concrete wedge can also be installed to retain the edge.

Paver Compaction - Only use a rubber-roller compactor for the final compaction.

Cleaners – Any cleaner specifically designed for pavers may be used for color restoration or general cleaning. Follow manufacturer’s dilution rates and application procedures. Always test a small area to make sure the results are as expected.

 Sealers 

  • Product may be sealed for aesthetic or cleanliness reasons but it is not required
  • Use any sealer approved for concrete pavers
  • Select type for desired aesthetics
  • Product must be cleaned before sealing
  • Always read and follow manufacturer’s application procedures
  • Always test a small area to make sure the results are as expected

Note:   The Americans with Disabilities Act Accessibility Guidelines (ADAAG) provides measurable criteria to determine compliance, not individual product evaluation. Gaps, joints or openings, greater than ½” horizontal and ¼” vertical should be avoided as they can disrupt wheelchair maneuvering (United States Access Board – Guidelines and Standards).

Unit Thickness (mm)
Layers per Bundle
Sq Ft per Bundle
Sq Ft per Layer
Sq Ft per Unit
Units per Bundle
Units per Layer
Lin Ft per Bundle - Soldier
Lin Ft per Layer - Soldier
Lin Ft per Unit - Soldier
Lin Ft per Bundle - Sailor
Lin Ft per Layer - Sailor
Lin Ft per Unit - Sailor
Lbs per Bundle
Lbs per Layer
Lbs per Unit
18"X24"
60
8
93
11.63
2.91
32
4
47.25
5.91
1.48
62.99
7.87
1.97
2,552.39
319.05
79.76
18"X36"
60
6
52.31
8.72
4.36
12
2
35.44
5.91
2.95
70.87
11.81
5.91
1,739.30
289.88
144.94
COPING CHAMFERED
60
6
-
-
-
12
2
-
-
-
35.46
5.91
2.96
1,547.40
257.90
128.95
COPING BULLNOSE
60
6
-
-
-
12
2
-
-
-
35.46
5.91
2.96
1,547.40
257.90
128.95

Knowledge
Center

Skip to content